Box Liner eLT3 (gekröpft 40')

Containerchassis with Gooseneck for 40' Container, Typ SDC 27 eLT3

The specialist for 40’ containers.

The offset chassis accommodates containers up to 40' long. With the Box Liner SDC 27 eLT3, containers in the sizes 1 x 40‘ (with tunnel), 2 x 20‘, 1 x 20‘ in middle (up to 30 to.) as well as 1 x 30‘ container flush with rear can be transported. An option for 40‘ containers without tunnel is available. Swap bodies 13.72 m with long tunnel (tunnel min. 3,675 mm) can also be transported.

BENEFITS AT A GLANCE

Specialist for containers with tunnel.
Extremely stable and strong.
Chequer plate platform between the main supports.
Rear lights installed in a protected location.
Can transport 13.72 mm swap bodies.

CONTAINER CHASSIS (EN) DATASHEETS

SPECIAL FEATURES

Box Liner SDC 27 eLT3

With the Box Liner SDC 27 eLT3, containers in the sizes 1 x 40‘ (with tunnel), 2 x 20‘, 1 x 20‘ in middle (up to 30 to.) as well as 1 x 30‘ container flush with rear can be transported. An option for 40‘ containers without tunnel is available.

Rear suitable for ramps

The Box Liner has strong steel ram buffers at the rear. The lighting support and underride protection must be replaced separately in the event of damage.

Folding supports

Folding container supports are provided for the front 20’ container.

Folding lock

The folding lock mechanisms ensure easy and convenient conversion from 40‘ to 2 x 20‘.

Chequer plate platform

Thanks to the chequer plate platform, 20’ containers transported in the middle can also be unloaded onto a ramp.

Plug-in stops

Both of the plug-in stops in the front load-bearing beam make it easier to load containers correctly. The stops can be removed to make the front 20' container accessible.

OUR SERVICES

Fleet Management

KRONE FLEET takes responsibility for your trailers always being in good condition and ready for use.